Detailed Product Description

Flexible LED light: LED SMD Ribbon Flex Strip(Black PCB)

This product is a low voltage (12 volt) LED lighting in a flexible thin (2mm) strip incased in a plastic weather resistance coating. Designed for the lighting professional, this lighting can be used for accent lighting in commercial application, concealed lighting and many other applications. Available in red, green, blue, yellow, white colors etc,.. LED Flex Ribbon Lighting  comes with a adhesive backing for easy installs. It's flat surface can easily mount onto most flat surfaces. It's small size and low voltage makes this lighting ideal for a wide range of applications.

.

Size300mm/600mm/900mm(*W8mm*H2mm)

Available ColourRed, yellow, blue, green, Cool white(6000~6500K) ,Warm    white(2800~3500K),
LED quantity15LEDs/30LEDs/45LEDs
Connector: Inserting pin
Beaming angle:120^o
Intensity (mcd/SMD):Red:500 Yellow:650 Blue:200 Green:600 White:1050 Warm white:1000
Input voltage:DC 12V  
Power consumption:1.5W /3W/4.5W

Working Temp.: -20°C~40°C
Working Humidity:0%-90%

Lifespan: ≥50000hours
Protection rating:IP55( indoor use)

.

Special Feature:

1,Black PCB for your special fondness.

2,Super thin

3,Flex

4,3M adhesive tape for easy installation

.

Applications:
1) architectural decorative lighting
2) Path & Contour Marking
3) Illuminated signs
4) emergency hallway lighting
5) auditorium walkway lighting
6) stairway accent lighting
7) concealed lighting
8) backlighting for signage letters
9) channel letter lighting
10) cove lighting

.

Caution:

Product cannot be re-connected after being cut and must be sealed.

The Min. bending radius is 2cm. The light and all its components can not be mechanically pressed.

During installation, do not damage the circuit.

Only qualified electrician or engineer can perform installation. Correct polarity is imperative.

Parallel connection only.

keep away from flammable materials.

Safety fuse is recommended when installing.

Damage from corrosion is NOT subject to material defect claims.

Voltage must not exceed 12VDC and must be regulated.

Tape may damage surface when removing.

For professional and commercial use only.